Wipers/Washers

9082-RAIN LIGHT SENSOR-INTERNAL LIGHT FAILURE-RCM

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on.

- Set Condition:
This DTC is set when an internal fault is set in the rain light sensor.





Diagnostic Test

1. RAIN LIGHT SENSOR
With the scan tool read RCM DTCs.
Does the scan tool read: 9082-RAIN LIGHT SENSOR-INTERNAL LIGHT FAILURE-RCM?

Yes

- Replace the Rain Light Sensor.
NOTE: The Rain Light Sensor must be reprogrammed after replacement.

- Perform the BODY VERIFICATION TEST - VER 1.Verification Tests

No

- Test complete.