Message Systems

9010-OUTPUT CONTROL CIRCUIT 15 LOW

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Continuously with the ignition on.

- Set Condition:
The Roof Control Module (RCM) detects that Output Terminal 15 is shorted to ground.





Diagnostic Test

1. DTC IS ACTIVE
Turn the ignition on.
With the scan tool, read RCM DTC's.
Is this DTC active?

Yes

- Repair the Output Terminal 15 circuit for a short to ground.
- Perform BODY VERIFICATION TEST - VER 1.Verification Tests

No

- The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.
- Perform BODY VERIFICATION TEST - VER 1. Verification Tests.