Event 7266

EVENT 7266-CRUISE CONTROL (ESP CONTROL UNIT) NOT AVAILABLE

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Ignition on. The Anti-Lock Brake Module monitors its internal microprocessors for correct operation.

- Set Condition:
If the Anti-lock brake module detects an internal fault, the DTC is set.





Diagnostic Test

1. ABM/ESP INTERNAL FAILURE DTC PRESENT
Turn the ignition on.
With the scan tool, read DTCs.
With the scan tool, erase DTCs.
Turn the ignition off.
Turn the ignition on.
With the scan tool, read DTCs.
Does the scan tool display EVENT 7266-CRUISE CONTROL (ESP CONTROL UNIT) NOT AVAILABLE IS ACTIVATED?

Yes

- Replace the Anti-Lock Brake Module.
- Perform ABS VERIFICATION TEST. Verification Tests.

No

- Refer to the ABS-INTERMITTENT CONDITION TEST.