Radio

D000-RADIO INTERNAL-RADIO

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
Whenever the radio is awake.

- Set Condition:
When the radio detects an internal fault.





Diagnostic Test

1. TEST FOR INTERMITTENT CONDITION
Turn the ignition on.
With the scan tool, record and erase DTC's.
With the scan tool, read DTC's.
Does the scan tool display D000-RADIO INTERNAL-RADIO?

Yes

- Go To 2

No

- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
- Perform BODY VERIFICATION TEST - VER 1.Verification Tests.

2. RADIO
This is an internal radio fault code.
Is the code active?

Yes

- Replace the radio.
- Perform BODY VERIFICATION TEST - VER 1. Verification Tests.

No

- Test Complete.
- Perform BODY VERIFICATION TEST - VER 1. Verification Tests.