4E49

4E49 DRIVE FAULT OCCURRED

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With ignition on.

- Set Condition:
Conditions for running drive test not met.





Diagnostic Test

1. CHECK FOR A DTC 4E49 DRIVE FAULT OCCURRED
NOTE: This DTC must be active for the results of this test to be valid.

Turn the ignition on.
With the scan tool, read and record DTCs.
Does the scan tool display: 4E49 DRIVE FAULT OCCURRED?

Yes

- Replace the Anti-Lock Brake Module.
- Perform ABS VERIFICATION TEST. Verification Tests

No

- Refer to the ABS-INTERMITTENT CONDITION TEST.