B226F

B226F-LEFT POWER SLIDING DOOR MODULE INTERNAL

For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
Whenever the battery is connected.

- Set Condition:
When the module senses an internal problem, this code will set.





Diagnostic Test

1. DTC PRESENT
With the scan tool, record and erase DTC's.
Cycle the ignition switch from On to Off.
Wait 30 seconds.
Turn the ignition on.
With the scan tool, read DTCs.
Does the scan tool display this DTC?

No

- Operate the Left Power Sliding Door with several power open and close cycles. With the scan tool, read DTC's. If this code appears, replace the Left Power Sliding Door Module.
- Perform BODY VERIFICATION TEST - VER 1. Verification Tests.

Yes

- Replace the Left Power Sliding Door Module.
- Perform BODY VERIFICATION TEST - VER 1.Verification Tests.