Wheel Stud / Lug Nut

Dual Rear Wheel Lug Nuts
Tighten according to the following procedure:





NOTE: Wheel lug nuts should be tightened to specified torque at every maintenance interval thereafter.

Tighten the wheel lug nuts (2) in a crisscross pattern until they are snug tight. Then tighten lug nuts to specified torque following same number sequence.
Tighten lug nuts in same numbered sequence a second time to the specified torque.
STEEL WHEELS 240 +10 Nm (177 +10 ft. lbs.)

Wheel Lug Nuts
All wheel nuts should then be tightened just snug. Gradually tighten them in sequence to the proper torque specification.
ALUMINUM WHEELS 180 +10 Nm (130 +10 ft. lbs.)