Front Center - Passenger Bench Seat

FRONT CENTER - PASSENGER BENCH SEAT

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler Mopar(R) Parts Catalog.




1. Move the driver side bucket seat to its most forward position and tilt the seat back forward for easiest access to the front passenger bench seat center buckle (1) and the left end of the bench seat riser (4).
2. Remove the screw (3) that secures the buckle lower anchor to the inboard side of the seat frame.
3. Remove the buckle and the spacer (2) from the inboard side of the seat frame.