Installation

BULB

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.




1. Align the base of the bulb with the clearance lamp bulb holder.
2. Push the bulb straight into the bulb holder until the base is firmly seated.
3. Insert the bulb into the clearance lamp housing until the bulb holder is firmly seated.
4. Rotate the bulb holder clockwise about 30 degrees to lock it into place.
5. Reinstall the clearance lamp (2) onto the roof panel.
6. Reconnect the battery negative cable.