A/C Compressor

A/C COMPRESSOR





The optional rear A/C system uses a Denso 10S17C ten cylinder, double-acting swash plate-type A/C compressor. This A/C compressor has an aluminum housing (1) with a fixed displacement of 170 cubic centimeters (10.374 cubic inches). This A/C compressor and is clutch operated (2) with suction and discharge ports (4) and has an integral high pressure relief valve (3) located near the rear of the compressor.

A label identifying the use of R-134a refrigerant and ND-8 PAG oil is located on each A/C compressor.