Installation

INSTALLATION




1. Position and install the engine mount to engine bolts. Tighten bolts to 45 Nm (33 lbs. ft.).
2. Lower the engine and remove the lifting fixtures.
3. Install the oil level indicator tube.
4. Raise and support the vehicle.
5. Tighten the engine mount through bolts to 110 Nm (81 ft. lbs.).
6. Install the skid plate.
7. Lower the vehicle.
8. Install the rear engine cover bracket and secure the transmission level indicator tube.
9. Install the front engine cover bracket.
10. Fill the engine with the correct viscosity oil to the proper level.
11. Connect the negative battery cable.
12. Install the engine cover.