FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Freightliner Truck >> 2007 >> Sprinter 3500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Left Mount >> Installation

Installation






INSTALLATION




1. Position and install the engine mount to engine bolts. Tighten bolts to 45 Nm (33 lbs. ft.).
2. Lower the engine and remove the engine hoist with chain.
3. Raise and support the vehicle.
4. Install the engine mount through bolts. Tighten bolts to 110 Nm (82 lbs. ft.).
5. Install the splash shield.
6. Lower the vehicle.
7. Install the power distribution center (PDC) bracket and PDC.
8. Install the battery tray and battery.
9. Install the engine cover bracket and secure the transmission tube.
10. Install the engine cover front bracket.
11. Install the engine cover.
12. Install the front structural bracket.
13. Install the coolant recovery container.
14. Connect the negative battery cable.
pro multis Credits:Operation CHARM About Operation CHARM