Front Brake Rotor - Single Rear Wheel (SRW)

FRONT BRAKE ROTOR - SINGLE REAR WHEEL (SRW)




1. Raise and support the vehicle.
2. Remove the front wheels.
3. Remove the caliper adapter bolts (1) and then remove the caliper (4) and adapter as an assembly.




4. Install two lug studs (2) to secure the disc brake rotor when the locking bolt (1) is removed.
5. Remove the locking bolt (1) for the disc brake rotor (3).
6. Remove the two lug studs.
7. Remove the disc brake rotor (3).