Rear Brake Rotor - (Dual Rear Wheels) (DRW)

REAR BRAKE ROTOR - (DUAL REAR WHEELS) (DRW)




1. Install the disc brake rotor (4) to the hub (6).
2. Install the disc brake caliper adapter (3). Tighten to 170 Nm (125 ft. lbs.).
3. Install the wheel flange ring (5). Tighten to 200 Nm (148 ft. lbs.).
4. Install the brake caliper (1).
5. Install the brake pads (2).
6. Adjust the parking brake.
7. Press and release the brake pedal several times until pressure has built up.
8. Check fluid in reservoir and correct if necessary.
9. Install the rear wheels.
10. Lower the vehicle.