D703

D703-CD MECHANICAL ERROR-TRAY 4-CDC

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

Whenever the CD player is on.

- Set Condition:

The code will set if a CD that is not formatted as a CD is installed in the CD player.






Diagnostic Test

1. CD PLAYER

Replace the problem CD with a good, clean, unscratched CD.

Turn the CD player on.

With the Scan Tool, read DTC's.

Does the Scan Tool display: D703-CD MECHANICAL ERROR-TRAY 4-CDC?

Yes

- Eject the inoperative CD and replace the CD.
- Perform the BODY VERIFICATION TEST - VER 1. Verification Tests

No

- Test Complete.
-