Installation

INSTALLATION











(a) Drive Belt
(b) Belt Tensioner

1. Install fan blade to viscous clutch. Tighten bolts to 9 Nm (80 lbs. in.).
2. Install fan and clutch along with fan shroud in to engine bay area.
3. Install the center bolt of the viscous clutch. Using Holding Tool 8930,

NOTE: The radiator fan assembly is attached (threaded) to the water pump hub shaft. Threads on the radiator fan drive are LEFT-HAND.. tighten bolt to 45 Nm (33 lbs. ft.).

4. Attach coolant line to lower radiator shroud.
5. Properly align and clip the fan shroud into place. Service and Repair
6. Connect negative battery cable.