Fuse Block: Service and Repair

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove fuse block cover by rotating locking screw 90 degree.
3. Remove the steering column cover.
4. Unscrew fuse block connections and disconnect all electrical connectors from the fuse block.
5. Remove the fuse block from the steering column.

INSTALLATION
1. Position the fuse block in the steering column.
2. Install fuse block connections and connect all electrical connectors on the fuse block.
3. Install the steering column cover.
4. Install fuse block cover by rotating locking screw 90 degree.
5. Connect the negative battery cable.
6. Set time and radio stations.