Tailpipe

TAILPIPE

REMOVAL
1. Raise and support the vehicle.
2. Saturate the clamp nuts with heat valve lubricant. Allow 5 minutes for penetration (Fig. 1).
3. Remove the clamp.
4. Remove the tailpipe and insulator form the vehicle
5. Remove the insulator from the tailpipe.

INSTALLATION
1. Position the tail pipe into the catalytic converter and muffler assembly until alignment tab is inserted into the alignment slot.
2. Install the insulator.
3. Install the clamp.
4. Lower the vehicle.
5. Start the vehicle and inspect for exhaust leaks. Repair exhaust leaks as necessary.
6. Check the exhaust system for contact with the body panels. Make necessary adjustments, if necessary.