Rear

REAR WHEEL SPEED SENSOR

REMOVAL
1. Raise and support the vehicle.
2. Remove the rear wheels.





3. Pull the wheel speed sensor out of the mounting hole in the axle supporting tube (Fig. 3).
4. Only due this step if sensor replacement is necessary. Cut through the wheel speed sensor cable at an easily accessible point (Fig. 3)
5. Remove clamping sleeve from the knuckle if damaged or being replaced with new sensor.

INSTALLATION
1. Connect separate wheel speed sensor cables with shrink-fit sleeves and shrink-fit tubing (Fig. 3). 0nly due this step if replacing the sensor.
2. Install the wheel speed sensor all the way into the axle tube, the wheel speed sensor will self adjust when the vehicle is moved (Fig. 3).
3. Install the rear wheels.
4. Lower the vehicle.