Rear

DISC BRAKE CALIPER ADAPTER - REAR

REMOVAL
1. Unscrew the cap from the brake fluid reservoir.
2. Raise and support the vehicle.
3. Remove the rear wheels.
4. Remove the disc brake caliper.
5. Remove the disc brake pads.
6. Remove the disc brake caliper adapter.

INSTALLATION
1. Install the brake caliper adapter to the axle mount. Tighten to 90 Nm (66 ft. lbs.) for M12X1.5 bolt or 170 Nm (125 ft. lbs.) for M14X1.5 bolt.
2. Install the disc brake pads.

NOTE: Do not install the brake hose twisted and ensure freedom of movement.

3. Install the disc brake caliper.
4. Install the rear wheels.
5. Lower the vehicle.