Repeater Lamp Bulb

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the repeater lamp unit from its mounting location, but do not disconnect it from the vehicle wire harness.

Repeater Lamp Bulb Remove/Install:

3. Pull the repeater lamp away from the vehicle far enough to access the bulb holder on the back of the lamp housing.
4. Grasp the lamp housing firmly in one hand, then pull the repeater lamp bulb holder straight out of the lamp housing.
5. Remove the repeater lamp bulb from the bulb holder.

INSTALLATION
1. Install the repeater lamp bulb into the bulb holder.
2. Grasp the lamp housing firmly in one hand, then push the repeater lamp bulb holder straight into the lamp housing.
3. Reinstall the repeater lamp unit into its mounting location.
4. Reconnect the battery negative cable.