Defroster Ducts

REMOVAL
1. Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument Panel Assembly Replacement,

Defroster Duct - RH Shown, LH Typical:

2. Remove the screw that secures the left and/or right side defroster duct to the heater housing, depending on the duct being removed.
3. Remove the defroster duct(s) from the housing.

INSTALLATION
1. Install the left and/or right side defroster duct on to the heater housing.
2. Install the screw that secures the defroster duct to the housing. Tighten the screw(s) to 2 N.m (17 in. lbs.).
3. Install the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument Panel Assembly Replacement,