105000 MI or 168000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Multi-point inspection - Recommended
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate driveshaft and U-joints if equipped with grease fittings.
    Tie Rod End
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Tie Rod Boot
      Inspect half-shaft boots (if equipped).
    Steering and Suspension
      Inspect and lubricate steering linkage and suspension if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s). Perform a follow-up inspection at 120,000 miles (192,000 km).
    Cooling System
      Inspect engine cooling system for strength, and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
Replace
    Oil Filter, Engine
    Engine Oil
    Coolant
      Change engine coolant. Initial replacement at 105,000 miles (168,000 km) or 71
    Cabin Air Filter / Purifier
      Replace cabin air filter (if equipped).
Rotate
    Tires