Engine Controls - Wrench Lamp, DTC P061A, U1011. P060C

TSB 13-5-2

05/03/13

WRENCH LAMP WITH DTC PO61A, U1O11 P060C,
REDUCTION IN VEHICLE POWER - BUILT ON OR
BEFORE 3/25/2013

FORD:
2013 Fusion

LINCOLN:
2013 MKZ

ISSUE
Some 2013 Fusion Hybrid/Energi and MKZ Hybrid vehicles built on or before 3/25/2013 may exhibit illuminated wrench lamp or red triangle lamp or both with diagnostic trouble code (DTC) PO61A in the powertrain control module (PCM) and/or U1011 in the transmission control module (TCM) and/or P060C in the TCM.

ACTION
Reprogram the PCM to the latest calibration using IDS release 84.02 and higher. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

OPERATION DESCRIPTION TIME

130502A 2013 Fusion And MKZ 0.4 Hr.
Hybrid: Check DTCs And
Reprogram The PCM
Includes Time To Clear
Codes After Repair (Do
Not Use With Any Other
Labor Operations)

DEALER CODING
CONDITION
BASIC PART NO. CODE
RECALEM 04





Disclaimer