100000 MI or 160000 KM
InspectWheels
Inspect the wheels and related components for abnormal noise, wear, looseness or drag, if using special operating condition D. Inspect wheels and related components for abnormal noise, wear, loosness or drag.
Vehicle
Perform multi-point inspection
Universal Joint, Drive/Propeller Shaft
Inspect rear axle and U-joints; lubricate if equipped with grease fittings.
Tie Rod End
Tie Rod Boot
Steering and Suspension
Inspect steering linkage, ball joint, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
Fluid - A/T
Inspect automatic transmission fluid level (if equipped with dipstick).
Exhaust System
Inspect exhaust system and heat shields.
Cooling System
Inspect engine cooling system and motor/electronics cooling system stength and hoses.
Constant Velocity Joint Boot
Inspect half-shaft boots (if equipped).
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
Ball Joint
Replace
Spark Plug
If not using special operating condition I.
Oil Filter, Engine
If using special operating condition D.
Engine Oil
Change engine oil and filter, if using special operating condition D. Change engine oil and filter.
Coolant
Change engine coolant and motor/electronics coolant. Initial replacement at six years or 100,000 miles (160,000 km), then every three years or 50,000 miles (80,000 km).
Cabin Air Filter / Purifier
If using normal condition. Replace cabin air filter (if equipped). Replace cabin air filter, if using special operating condition I and/or D.
Air Filter Element
Replace engine air filter, if using special operating condition I and/or D.
Rotate
Tires
Rotate tires, inspect tire wear and measure tread depth. Rotate tires, inspect tires for wear and measure tread depth, when using special condition D.