Attachment II - Labor and Parts Information

LABOR ALLOWANCES





PARTS REQUIREMENTS / ORDERING INFORMATION

The DOR/COR number for this recall is 50501.

To manage part availability dealers must contact the Special Service Support Center Parts Order Line.

When calling to place an order for a headliner please be prepared to provide dealer P&A code VIN and RO #.

Dealers will be notified via a DOES II communication if circumstances warrant a change in part supply strategy and when open ordering resumes.

REQUIRED SPECIAL TOOLS

To perform the headliner modification a special Dremel(R) 9903 Tungsten Carbide Bit (Cutter) is required for reimbursement see Claims Preparation and Submission in Attachment I.

DEALER PRICE

For latest prices refer to DOES II.

PARTS RETENTION AND RETURN

Affected parts are subject to random selection for return to the Ford Warranty Parts Analysis Center (WPAC). Refer to your daily PEARS (Parts Entry and Return System) register for part disposition and return instructions.

Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures."

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.