Keyless System - Keyless Entry Inop, No Crank After Remote Star

TSB 13-4-4

04/10/13

REMOTE KEYLESS ENTRY FUNCTIONS
INOPERATIVE - NO CRANK AFTER REMOTE START
EVENT - DTC P1595 - BUILT ON OR BEFORE
3/12/2013

FORD:
2013 Fusion

LINCOLN:
2013 MKZ

ISSUE
Some 2013 Fusion and MKZ vehicles built on or before 3/12/2013 may exhibit a concern where all remote keyless entry (RKE) functions are inoperative from both remote controls and/or the vehicle may exhibit a no crank condition after a remote start event. Diagnostic trouble code (DTC) P1595 may also be present in the powertrain control module (PCM). This concern may be present on vehicles with intelligent access keys (push button start) and integrated keyhead transmitters (traditional key start).

ACTION
Reprogram the radio transceiver module (RTM) and the body control module (BCM) to the latest calibration using IDS release 84.01 and higher. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

OPERATION DESCRIPTION TIME

130404A 2013 Fusion And MKZ: 0.4 Hr.
Check DTCs And
Reprogram The RTM And
BCM Includes Time To
Clear Codes After Repair
(Do Not Use With Any
Other Labor Operations)

DEALER CODING
CONDITION
BASIC PART NO. CODE
15604 42





Disclaimer