Removal and Replacement

Rear Bumper Cover

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Before beginning any service procedure. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions. Service Precautions

2. Remove the rear wheel and tire assemblies.
Refer to: Wheel and Tire.

3. On each side.
Torque: 1.5 Nm

4. Torque: 1.5 Nm

5. Remove the rear lamp assemblies.
Refer to: Rear Lamp Assembly - 4-Door.

6. On each side.

7. On each side.

10. NOTE: On each side.

Inspect the bumper reinforcements for damage to the bumper cover gripping surfaces.

11. If required.
Torque: 1.5 Nm

Installation

1. To install, reverse the removal procedure.