Engine Controls - Wrench Lamp ON, DTC P061A/U011/P060C
TSB 13-4-2204/30/13
WRENCH LAMP WITH DTC P061A/U1011/P060C -
REDUCTION IN VEHICLE POWER
FORD:
2013 C-MAX
ISSUE
Some 2013 C-MAX Hybrid/Energi vehicles built on or before 4/9/2013 may exhibit illuminated wrench lamp or red triangle lamp or both with diagnostic trouble code (DTC) PO61A in the powertrain control module (PCM) and/or U1011 in the transmission control module (TCM) and/or P060C in the TCM.
ACTION
Reprogram the PCM to the latest calibration using
IDS release 84.02 and higher. Calibration files may
also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
130422A 2013 C-MAX: Check DTCs 0.4 Hr.
and Reprogram The
PCM. (Do Not Use With
Any Other Labor
Operation)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECALEM 04
Disclaimer