Seat Backrest Cover - Rear, 60 Percent

Seat Backrest Cover - Rear, 60 Percent

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row .

1. Remove the rear seat backrest. For additional information, refer to Seat Backrest- Rear Seat Backrest - Rear.

2. Remove the 4 head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve- Front Head Restraint Guide Sleeve - Front.

3. If equipped, separate the heater mat electrical connector.





4. Disengage the backrest cover J-clip at the bottom, separate the hook-and-loop strips and disengage the retainers on each side.





5. Remove 2 bolts and armrest with bracket.





6. Remove the 2 pin-type retainers at the armrest pocket.





7. NOTICE: Use care when separating the backrest cover wires from the backrest foam pad clips, or the clips can be torn from the backrest foam pad.

NOTICE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.

Release the hook-and-loop strips, disengage the wires from the clips and remove the backrest cover.
- Route the heated seat mat wire harness and connector out of the backrest cover (if equipped).






Installation

1. Position the backrest cover to the backrest foam pad. Attach the wires to the clips and the hook-and-loop strips.
- Route the heated seat mat wire harness and connector through the backrest cover (if equipped).






2. Route the latch release strap through the backrest cover.





3. Install the 2 pin-type retainers at the armrest pocket.

4. Position the armrest with bracket and install the 2 bolts.
- Tighten to 10 Nm (89 lb-in).


5. Attach the backrest cover hook-and-loop strips and engage the retainers on each side.

6. Engage the backrest cover J-clips and hook-and-loop strips at the bottom.
- Attach the heater mat electrical connector (if equipped).


7. Install the 4 head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve- Front Head Restraint Guide Sleeve - Front.

8. Install the rear seat backrest. For additional information, refer to Seat Backrest- Rear Seat Backrest - Rear.