C-Pillar Trim Panel

C-Pillar Trim Panel

Removal and Installation

1. Remove the rear seat bolster.

2. NOTE: The seatback has been removed for clarity. The screw is accessible with the seatback in place.

Remove the C-pillar trim panel screw.

- To install, tighten to 10 Nm (89 lb-in).






3. NOTE: The seatback has been removed for clarity.

Remove the C-pillar trim panel.

- Pull the C-pillar toward the center of the vehicle.






4. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim panel before installing.

To install, reverse the removal procedure.