Scuff Plate Trim Panel - Rear

Scuff Plate Trim Panel - Rear

Removal and Installation

1. Remove the rear seat bolster.

2. Position the rear of the scuff plate trim panel away from the body mounting stud.

3. Pull the front of the scuff plate trim panel upward to release the retaining clips.

4. Pull the rear of the scuff plate trim panel upward to release the retaining clips.

5. Remove the scuff plate trim panel.

6. NOTICE: To avoid damage to the scuff plate trim panel, remove any retaining clips from the body and attach them to the scuff plate trim panel before installing.

To install, reverse the removal procedure.