Spoiler: Service and Repair

Spoiler - Rear

NOTE: Rear view camera shown, all others similar.









Removal

1. Remove the spoiler plugs.

2. Remove the 4 rear spoiler nuts.

3. NOTE: The rear spoiler is held on by double-sided tape.
Using a non-metal fishing line or equivalent, cut the double-sided tape.






Installation

1. Clean the rear spoiler mounting surfaces.

2. Apply double-sided tape to the rear spoiler as shown.





3. Install the rear spoiler.

4. Install the 4 rear spoiler nuts.
- Tighten to 5 Nm (44 lb-in).


5. Install the 2 rear spoiler plugs.