Air Cleaner Housing: Service and Repair

Air Cleaner Outlet Pipe

Removal and Installation

1. Disconnect the crankcase ventilation tube-to-Air Cleaner (ACL) outlet pipe quick connect coupling.

2. Remove the vacuum tube to ACL (Air Cleaner) outlet pipe.

3. Loosen the clamp and remove the ACL (Air Cleaner) outlet pipe from the Throttle Body (TB).
- To install, tighten to 4 Nm (35 lb-in).


4. Loosen the ACL (Air Cleaner) outlet pipe-to-ACL (Air Cleaner) housing cover clamp.
- Remove the ACL (Air Cleaner) outlet pipe.

- To install, tighten to 4 Nm (35 lb-in).


5. NOTE: The ACL (Air Cleaner) outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
To install, reverse the removal procedure.