Fuel Cut-Out Switch: Service and Repair

Inertia Fuel Shutoff (IFS) Switch - 3.5L









Removal and Installation

1. Remove the RH front door scuff plate.

2. Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.

3. NOTICE: Do not overtighten the fasteners or damage to the switch will occur.

Remove the 2 bolts and the IFS (Inertia Fuel Shutoff) switch.
- To install, tighten to 2 Nm (18 lb-in).


4. To install, reverse the removal procedure.