Pinpoint Test M: An Individual Button/Feature Is Inoperative From The Remote Keyless Entry (RKE) Transmitter

Handles, Locks, Latches and Entry Systems

Pinpoint Test M: An Individual Button/Feature Is Inoperative From The Remote Keyless Entry (RKE) Transmitter

Normal Operation

When any Integrated Keyhead Transmitter (IKT) button is pressed, the SJB (Smart Junction Box) receives and processes the command to provide the appropriate output.

This pinpoint test is intended to diagnose the following:

- Door locks

- Horn system

- Luggage compartment lid release

- Turn signal system

- IKT (Integrated Keyhead Transmitter)

PINPOINT TEST M : AN INDIVIDUAL BUTTON/FEATURE IS INOPERATIVE FROM THE RKE (Remote Keyless Entry) TRANSMITTER

NOTE: The panic feature will only operate when the key is in the OFF or LOCK positions.

M1 VERIFY THE DOOR LOCK OPERATION

- Press the lock and unlock button on the driver door lock control switch while observing the door lock operation.

Do the door locks operate correctly?

Yes
GO to M2.

No
GO to Symptom Chart - Electrical. Symptom Related Diagnostic Procedures

M2 VERIFY THE HORN OPERATION

- Enter the following diagnostic mode on the scan tool: SJB (Smart Junction Box) DataLogger.

- Select the SJB (Smart Junction Box) PID (HORN) and active command the horn on.

Does the horn sound when commanded on?

Yes
GO to M3.

No
REFER to Horn.

M3 VERIFY THE HAZARD LAMP OPERATION

- Place the hazard switch in the ON position.

Do the hazard lamps operate correctly?

Yes
GO to M4.

No
REFER to Lighting and Horns.

M4 VERIFY THE LUGGAGE COMPARTMENT LID RELEASE OPERATION

- Press the luggage compartment lid release button, located next to the headlamp switch.

Does the luggage compartment lid release?

Yes
REPLACE the inoperative IKT (Integrated Keyhead Transmitter) and PROGRAM the IKT (Integrated Keyhead Transmitter) individually or PROGRAM all the IKTs (Integrated Keyhead Transmitters). REFER to Antitheft and Alarm Systems for the programming procedures. If all the IKTs (Integrated Keyhead Transmitters) are to be programmed, INFORM the customer that any IKTs (Integrated Keyhead Transmitters) not present need to be programmed. TEST the system for normal operation.

No
GO to Symptom Chart - Electrical. Symptom Related Diagnostic Procedures