Component Description

Automatic Transaxle-Transmission External Controls - Select Shift

Component Description

Brake Shift Interlock Actuator

The brake shift interlock system consists of:

- a BSIA (Brake Shift Interlock Actuator) that is integral to the selector lever assembly.

- an ignition switch.

- a BPP (Brake Pedal Position) switch.

- a BCM (Body Control Module).

Selector Lever Cable

The selector lever cable consists of:

- a cable that connects the transaxle manual control lever to the selector lever assembly.

- a cable grommet that is fastened to the floor pan.

- adjuster locking tab at the transaxle manual control lever.

Selector Lever

The selector lever consists of:

- a selector lever knob

- a BSIA (Brake Shift Interlock Actuator) that is integral to the selector lever assembly.

- a TCS (Transmission Control Switch) that is integral to the selector lever knob.

Select Shift Switch

The SelectShift (TM) Switch is a toggle switch integral to the selector lever knob. If a new switch is required install a new selector lever knob.