Knock Sensor: Service and Repair

Knock Sensor (KS) - 2.0L GDI

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View










Removal

1. Remove the intake manifold. REFER to Intake Manifold .

2. Remove the 2 bolts and the 2 KS (Knock Sensor).

Installation

1. Install the 2 KS (Knock Sensor) and the 2 bolts.
- Tighten to 20 Nm (177 lb-in).

2. Install the intake manifold. REFER to Intake Manifold .