Brake Light Switch: Service and Repair

Stoplamp Switch

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Exploded View










Removal

1. Remove the LH (Left Hand) instrument panel side trim panel and the steering column cover trim panel. REFER to Instrument Panel - Exploded View .

2.





Installation

NOTICE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.

1. To install, reverse the removal procedure.

- Perform the brake pedal switch adjustment. REFER to Brake Pedal Switch Adjustment .