Window Glass - Front Door

Window Glass - Front Door

Removal and Installation

1. Fully lower the front door window glass.

2. Remove the front door trim panel.

3. Remove the interior door window glass belt moulding.

4. Remove and discard the exterior door window glass belt moulding.

5. Remove the 2 access hole plugs.

6. Connect the window control switch, or install the window regulator handle.

7. Position the window glass in order to access the window glass clamp bolts.

8. Loosen the 2 window glass clamp bolts.

9. Tilt the window glass forward and lift upward to remove the window glass from the door.

Installation

1. Install the window glass into the door.

2. NOTE: The window glass clamp bolts will be tightened when performing this step.

Before tightening the window glass clamp bolts, make sure window glass is adjusted correctly. For additional information, refer to Window Glass Adjustment Adjustments.

3. Install the 2 access hole plugs.

4. Fully lower the front door window glass.

5. Install a new exterior door window glass belt moulding.

6. Install the interior door window glass belt moulding.

7. Install the front door trim panel.

8. If installing a new LH front window glass, the LH window motor must be initialized. For additional information, refer to Window Motor Initialization Programming and Relearning.