Pinpoint Tests

Fuel System

Pinpoint Test

Pinpoint Test A: Slow to Fill

Normal Operation

Under normal operation, fuel should flow at a steady rate through the fuel tank filler pipe into the fuel tank. As fuel enters the fuel tank, air is vented through the filler pipe or the On-Board Refueling Vapor Recovery (ORVR) system.

This pinpoint test is intended to diagnose the following:

- Fuel tank filler pipe fresh air hose or recirculation tube, if equipped

- Fuel tank filler pipe

- Evaporative Emission (EVAP) system

- Fuel tank inlet check valve (part of the fuel tank)

- Fuel level vent valve (part of the fuel tank)

PINPOINT TEST A : SLOW TO FILL

A1 CARRY OUT INSPECTION AND VERIFICATION

- Carry out inspection and verification Inspection and Verification.

Was the cause of the concern found?

Yes
REPAIR or INSTALL new components to correct the concern.

No
GO to A2.

A2 CHECK THE SYSTEM FOR ANY EVAP (Evaporative Emission) DTCs

- Connect the scan tool.

- Check the system for any of the following EVAP (Evaporative Emission) DTCs: P0446, P0451, P0452, P0453, P0454, P1450, P1451 and P260F.

Are any of these DTCs present?

Yes
REFER to Computers and Control Systems Information to diagnosis the EVAP (Evaporative Emission) system.

No
GO to A3.

A3 CHECK THE FUEL TANK FILLER PIPE ASSEMBLY FOR BLOCKAGE OR RESTRICTION

- Remove the fuel tank filler pipe assembly.

- Inspect the fuel tank filler pipe and fuel tank filler pipe fresh air hose or recirculation tube (if equipped) for a blockage or restriction.

Is the fuel tank filler pipe or fuel tank filler pipe fresh air hose or recirculation tube (if equipped) blocked or restricted?

Yes
If possible, REPAIR the blockage or restriction. If the blockage or restriction cannot be repaired, INSTALL a new fuel tank filler pipe.

No
GO to A4.

A4 CHECK THE FUEL TANK INLET CHECK VALVE

- Inspect the fuel tank inlet check valve for restriction or sticking.

Is the fuel tank inlet check valve restricted or sticking?

Yes
If possible, REPAIR the restriction. If the restriction cannot be repaired, INSTALL a new fuel tank.

No
INSTALL a new fuel tank.