Transmission Mount: Service and Repair

Transmission Insulator and Retainer









1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the 2 transmission support insulator nuts.
- To install, tighten to 70 Nm (52 lb-ft).





3. Using a suitable transmission jack, support the transmission.

4. Remove the 3 bolts and the transmission support insulator.
- To install, tighten to 103 Nm (76 lb-ft).





5. To install, reverse the removal procedure.