Rear Suspension

Stabilizer Bar Link













Removal and Installation

1. Remove the stabilizer bar. For additional information, refer to Stabilizer Bar Rear Suspension.

2. NOTE: To aid removal, apply a light coat of silicone lubricant to the necessary parts of the rear stabilizer bar and the inside diameter of the stabilizer bar bushing and link.

Remove the stabilizer bar bushing and link.

1. Slide the bushing off of the stabilizer bar.

2. Slide the link off of the stabilizer bar.





3. NOTE: The stabilizer bar links and bushings are vehicle specific (convertible and coupe). Make sure the correct link and bushing go on the correct vehicle.

Links are color coded for specific packages. Replace link with the same color as the link removed.

NOTE: To aid installation, apply a light coat of silicone lubricant to the necessary parts of the rear stabilizer bar and the inside diameter of the stabilizer bar bushing and link.

To install, reverse the removal procedure.