Oil Level Indicator and Tube

Oil Level Indicator and Tube













Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the LH exhaust manifold. For additional information, refer to Exhaust Manifold - LH Exhaust Manifold - LH.

3. Remove the oil level indicator.

4. Remove the oil level indicator tube bolt.
- To install, tighten to 10 Nm (89 lb-in).

5. Remove the oil level indicator tube.
- Discard the O-ring seal.

6. To install, reverse the removal procedure.
- Lubricate the new oil level indicator tube O-ring seal with clean engine oil prior to installation.