Cruise Control Switch

Cruise Control Switch

Without Audio Controls









With Audio Controls









Removal and Installation

1. Remove the driver air bag module. For additional information, refer to Restraint Systems.

2. NOTE: Carefully grasp and pull the edges to remove the steering wheel spoke finish panels.

If equipped, remove the steering wheel spoke finish panels.

3. NOTE: Using a small, flat-bladed screwdriver, gently pry up the cruise control switches from the steering wheel, beginning at the outer edge. Use care not to damage the steering wheel.

Remove the cruise control switches.

- Disconnect the electrical connector(s).

4. To install, reverse the removal procedure.