Radiator Cooling Fan Motor: Service and Repair

Cooling Fan Motor and Shroud - 4.0L SOHC

















1. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

2. Remove the bolt and position aside the power steering reservoir.
- To install, tighten to 9 Nm (80 lb-in).

3. Detach the lower degas bottle hose from the cooling fan and shroud retaining clip.

4. Remove the 2 bolts and position aside the degas bottle.
- To install, tighten to 8 Nm (71 lb-in).

5. Disconnect the cooling fan motor and shroud electrical connector.

6. Remove the 2 bolts and the cooling fan motor and shroud.
- To install, tighten to 9 Nm (80 lb-in).

7. To install, reverse the removal procedure.