Seat Recliner - Inboard, Second Row, 60 Percent

Seat Recliner - Inboard, Second Row, 60 Percent, Taurus X

Removal and Installation

1. Remove the 60 percent seat from the vehicle. For additional information, refer to Seat - Rear, Second Row, Taurus X Seat - Rear, Second Row.

2. Remove the 60 percent rear seat backrest. For additional information, refer to Seat Backrest - Second Row, 60 Percent, Taurus X Seat Backrest - Second Row, 60 Percent.

3. Remove the pin-type retainer, screw and RH recliner cover.

4. Remove the 3 RH recliner-to-riser bolts.
- To install, tighten to 50 Nm (37 lb-ft).

5. NOTE: Note cable routing for correct installation.

Remove the cushion frame yoke-to-RH recliner bolt, detach the cable and remove the RH recliner.

- To install, tighten to 50 Nm (37 lb-ft).

6. To install, reverse the removal procedure.