C-Pillar Trim Panel

C-Pillar Trim Panel - Taurus X

Removal and Installation

1. Remove the C-pillar trim screw cover.

2. Remove the C-pillar trim screw.

3. Remove the second row safety belt anchor-to-floor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

4. Remove the C-pillar trim panel.
- Pull the C-pillar trim panel toward the inside of the vehicle to release the retaining clips.

5. NOTICE: To avoid damage to the C-pillar trim panel, remove any retaining clips from the body and attach them to the C-pillar trim panel before installing.

To install, reverse the removal procedure.