Pinpoint Test B: The Transmission Selector Lever Is Out Of Correct Gear Relationship

External Controls

Pinpoint Tests

PINPOINT TEST B: THE TRANSMISSION SELECTOR LEVER IS OUT OF CORRECT GEAR RELATIONSHIP

-------------------------------------------------
B1 CHECK THE TRANSMISSION SELECTOR LEVER LINKAGE


- Ignition ON.
- Apply the brake pedal.
- Move the transmission selector lever in all ranges.
- Observe the transmission selector lever linkage during operation.
- Is the transmission selector lever linkage OK?

Yes
GO to B2.

No
REPAIR as necessary. TEST the system for normal operation.

-------------------------------------------------
B2 CHECK THE TRANSMISSION SELECTOR LEVER CABLE


- Check the transmission selector lever cable and transmission selector lever cable bracket installation and tightness.
- Is the transmission selector lever cable and transmission selector lever cable bracket correctly installed and adjusted?

Yes
GO to B3.

No
REPAIR as necessary. REFER to Selector Lever Cable and Bracket Service and Repair. TEST the system for normal operation.

-------------------------------------------------
B3 CHECK THE TRANSMISSION SELECTOR LEVER LINKAGE/CABLE FOR CORRECT GEAR RELATIONSHIP


- Apply the brake pedal.
- Move the transmission selector lever in all ranges.
- Does the indicator match the gear selection?

Yes
VERIFY the correct adjustment of the Transmission Range (TR) sensor. ADJUST the TR sensor if necessary. TEST the system for normal operation.

No
ADJUST the transmission selector lever cable. REFER to Selector Lever Cable Adjustment Selector Lever Cable Adjustment. TEST the system for normal operation.

-------------------------------------------------