Planetary Gearset - Forward

Geartrain

Power is transmitted from the torque converter to the planetary gearsets through the input shaft. Bands and clutches are used to hold and drive certain combinations of gearsets. This results in 5 forward ratios and 1 reverse ratio, which are transmitted to the output shaft and differential.






Planetary Gearset - Forward

For component location, refer to Transmission Transmission Assembly.

The forward planetary gearset is splined to the output shaft.

- The forward planetary gearset is driven by the forward ring gear when the forward clutch is applied.
- The forward planetary gearset pinions drive the forward sun gear.
- The forward sun gear is splined to the input shell.
- The forward carrier is splined to the output shaft.